3. Flash Images
❶ Open RKDevTool.exe on Windows.
❸ Click Upgrade Firmware -> Firmware, select
update.img, click Upgrade to flash.
User can also update the firmware separately.
❷ Check the partitions to be flashed, multiple partitions can be selected.
❸ Ensure the image file path is correct. If necessary, click the blank cell next to the path to reselect it.
❹ Click Run to flash the image.
After the flashing is complete, the board will automatically reboot.
Note
If parameter.txt is not to be flashed, please check ✅️ Write by Address, otherwise the flashing may fail with the error of Image is larger than partition size.
