* Source Code for Android2.3, WinCE6.0 and Linux2.6.28
* Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz.
* 128MB Mobile DDR SDRAM, 266MHz, Samsung K4X51163PC
* 256MB SLC NAND Flash, Samsung K2F2G08, 1G Nand Flash optional
* 2MB NOR Flash, AMD AM29LV160DB
* 1 EEPROM, support I2C, it can be soldered with AT88SC016 for encryption
* SDIO WIFI Module, supporting IEEE802.11b/g
* LCD/Touch Screen interface. Supporting 4.3", 7" TFT LCD
* GPIO, ADC, SPI, IIC, I/O, Interrupts and MMC are in 2 2x20 pin header
* One audio input interface (3.5mm audio jack)
* One 2-channel audio output interface (3.5mm audio jack)
* One 100M Ethernet interface (RJ45)
* One USB2.0 Host port (USB A/F type interface)
* One USB2.0 Device port (Mini USB type interface)
* Four serial ports (Two are five-wire interface, another two are three-wire TTL serial interface)
* 2 SD/MMC interface (supports 3.3V and 1.8V logic voltage)
* Camera interface (10x2 pins header, supporting the mode of ITU-R 601/656 8bit)
* One 5x2 pins JTAG interface
* Seven buttons (Reset, Boot, User defined, On/Off)
* One TVOUT
* Power supply: +12V
* Optional module: GPS, WIFI, Camera, USB HUB+4x4 Matrix Keyboard, USB 3G Modem
* Board Dimension: 116.6 x 76.8 x 17mm
SBC6410 is based on Samsung S3C6410 - an advanced ARM11 CPU for running operating system and application code, and for dedicated video processing. Low voltage Mobile DDR enables very low power consumption in regular operation and in standby. For embedded applications,the SBC6410 provides a general purpose local bus, 100Mbit Ethernet, serial ports, I/O lines and other essential functions, while integrated WiFi interface implement industry standard wireless connectivity.The small size and low power consumption of the SBC6410 allows its integration into hand-held and mobile devices, while its low price makes it an ideal selection for cost-sensitive applications.The SBC6410 delivers a price / performance ratio significantly better than that of any other platform.
|
OS |
Item |
Feature |
Description |
|
Linux2.6.28 |
Bootloader |
u-boot |
u-boot-1.1.6 Main functions:
1. Supporting Nand Flash erase/write/read
2. Supporting USB download Image
3. Supporting print, set, save Environment Variables
4. Supporting memory 's contents display/compare/modify
5. Supporting bootm, bootargs setting |
|
Sdboot |
1. SD Card boot-up and download Image via USB (can replace JTAG)
2. Replace booting LOGO |
|
Image update |
Supporting Image update from SD Card or USB |
|
Kernel and drivers |
Version |
Linux 2.6.28.8 |
|
File system Format |
ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS |
|
Drivers |
DDR RAM, Nand Flash, Serial ports, RTC, Ethernet, 4.3" and 7"LCD including Touch Screen, MMD/SD, USB Host, LEDs, AC97, Camera, USB Keyboard and Mouse, IIC, SPI, WAVEDEV, DMA,JPEG, MFC, TVOUT, OpenGLES1.1&2.0, D3DM |
|
File System |
File System |
Yaffs or NFS File System |
|
Function |
Provided Lib (ALSA -lib, tslib, glibc), udev support |
|
Embedded GUI |
Qtopia 2.2.0 |
Support file browser, Mediaplayer, Calendar, time, counter, Touch Screen Calibration program, Plug-in manager. |
|
Network protocol
& application |
Network protocol |
TCP/IP protocol, Telnet, FTP Client/server, Boa webserver |
|
Application |
H.264 display, MPEG-4 display, H.263 display, VC-1 display, 4-windows display, Camera preview & MFC encoding, MFC decoding & Camera preview, Camera input and JPEG encoding, JPEG decoding and display, MFC decoding & Camera preview thru TV, H.264 decoding thru TVOUT |
|
Cross compiler Environment |
3.3.2 , 3.4.1 , 4.3.3-eabi |
|
WinCE6.0 |
Boot |
Stepldr |
Providing Source code and STEPLDR.bin |
|
Eboot |
Providing Source code and EBOOT.bin
Eboot main functions:
1. Ethernet download: Set static IP, HDCP gets Dynamic IP, Mac address setting, download kernel automatically by Ethernet when the system starts.
2. USB download: update the image via USB OTG 2.0
3. Format Nand Flash
4. Format BinFS
5. Low-level Format
6. Set boot-up delayed time
7. Booting process bar |
|
Sdboot |
1. SD Card boot-up and download Image via USB (can replace JTAG)
2. Replace booting LOGO |
|
System |
Driver |
1. 4.3" and 7" LCD including Touch Screen, TVOUT, LEDs
2. Supporting 16/18/24Bpp
3. Supporting LCD display rotate |
|
SD card, High speed SD card, SPI, AC97, Camera, Ethernet, USB Host, USB Device, Serial ports, RTC,GPS, WIFI,IIC,JPEG, SPI,Keyboard, NandFlash, wavedev, CF_ATA, CMM, DMA, DrvLib, MFC, Powerbutton, Powercontrol, UA0 |
|
Function |
220MB NAND Flash for user |
|
Power Management (backlight drive, battery-driven, sleep/wake-up function), Hive registry support, ROM file system support |
|
Application |
MFC Video Encode/decode |
Providing Source Code and user manual, supporting MPEG-4/H264/H263/VC-1 and API operation manual |
|
DirectShow Filter |
Providing Source Code including:
AACDecoderFilter, FrameExtractFilter, MFCDecoderFilter, MP4testcode, mpeg4ip_mp4v2, SsapMP4Parser |
|
JPEG |
JPEG/JPG encoding and decoding, providing driver and test program. |
|
OpenGL |
OpenGL ES1.1&2.0, providing source code and user manual |
|
Camera |
Supporting CMOS Image sensor-ov9650/9653/9655 |
|
TCPMP |
Hardware decode MPEG-4/H263/H264/VC-1, supporting avi,mp4, m4v, mov, 3gp, flv, MPG.
Supporting DIVX, XVID
Supporting MP1, MP2, MP3, AC3, AAC more audio kinds. |
|
OFFICE |
Word, Excel, PowerPoint, PDF,txt, Skype |
|
Android2.3 |
Boot |
Version |
U-boot 1.1.6 |
|
Boot Mode |
Boot Android from SD card, NAND Flash |
|
Image update |
Support updating image from SD card or USB |
|
Kernel and drivers |
Version |
Linux 2.6.36-Android |
|
Drivers |
DDR, Flash, Serial ports, RTC, 4.3" and 7" LCD including Touch Screen, MMD/SD, High Speed SD card, user buttons, DM9000, IIC,SPI, keyboard, WAVEDEV, DMA, USB device, JPEG, MFC, TV OUT, Rotator, OpenGGES1.1 & 2.0, D3DM |
|
Application |
Alarm Clock, ASTRO, Mediaplayer, Music, Picsay, Gallery, Browser, Panda Reader |
|
File System |
File System Format |
Yaffs2 (Androidfs-sdk-m5-rc15) |
|
Embedded GUI |
Android-2.0 |
Support file browser, Mediaplayer |
|
Cross compiler Environment |
Arm-none-linux-gnueabi |
|
|
Debug Tools |
DNW,MoviNAND_ Fusing_Tool.exe |
|
.  PCB Dimension.pdf
. ARM11 S3C6410 Datasheet
|
Expansion Module |
Module Detail |
Linux |
Android |
Wince |
|
SDIO WiFi Module |
WiFi Module, supports IEEE 802.11b/g, WM-G-MR-09 Module inside |
√ |
√ |
√ |
|
CMOS Camera |
1.3 Megapixel, OV9650 |
√ |
√ |
√ |
|
GPS Module |
GPS Module, GS-87 |
√ |
√ |
x |
|
GPRS Module |
GPRS Module, base on SIMENS MC388 |
√ |
x |
x |
| 3G Module |
USB WCDMA Module, HUAWEI E1750 Module inside |
√ |
√ |
x |
| TTL to RS232 Module |
Change TTL to RS232 |
√ |
√ |
√ |
| Bluetooth Module |
USB Bluetooth Dongle |
x |
x |
√ |
* One ARM11 SBC6410
* One CD-ROM (WinCE 6.0 BSP, Linux BSP, Documents, tools, Schematic Drawing, datasheets)
* One Serial cable (IDC10-to-DB9)
* One 12V@2A Power adapter
* One USB cable
* One Cross Ethernet cable
|
Product name |
price |
Buy Now |
|
SBC6410 Single Board Computer |
USD 90.00 |
|
|
SBC6410 Single Board Computer + 4.3Inch TFT LCD&TSP |
USD120.00 |
|
|
SBC6410 Single Board Computer + 7Inch TFT LCD&TSP |
USD140.00 |
|
|
Note: If order the optional items: GPS, Camera, USB HUB and Matrix Keyboard Module. Please kindly contact us at market@armdesigner.com | |
